Characteristics Data of NSN 3020-00-355-2547, 3020003552547
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | WEBBED, SOLID |
| ABSA | SPLINE QUANTITY | 10 BOTH ENDS |
| AGJS | PITCH DIAMETER | 4.5000 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 18 |
| ANTP | BORE STYLE | STRAIGHT SPLINE BOTH ENDS |
| CQFM | HARDNESS RATING | 52.1 ROCKWELL C MINIMUM OVERALL AND 59.2 ROCKWELL C MAXIMUM OVERALL |
| CWCD | NOMINAL OUTSIDE DIAMETER | 4.607 INCHES |
| CWFR | NOMINAL OVERALL LENGTH | 1.865 INCHES |
| CWMW | TEETH TYPE | STRAIGHT |
| CWPP | PRESSURE ANGLE | 63.4333 DEGREES |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.318 INCHES SECOND END |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.687 INCHES FIRST END |
| CWRM | FACE NOMINAL WIDTH | 0.875 INCHES |
| CWTR | HUB STYLE DESIGNATOR | PLAIN BOTH ENDS |
| CWTX | HUB NOMINAL DIAMETER | 2.185 INCHES FIRST END |
| CWTX | HUB NOMINAL DIAMETER | 2.370 INCHES SECOND END |
| FEAT | SPECIAL FEATURES | 3THREE 5/32 IN. DIA DRILLED HOLES EQUALLY SPACED AT AN ANGLE BETWEEN TEETH TO BACK SIDE OF GEAR,RELIEVED 1/32 IN. DEEP BY 1/16 IN. ON BOTH SIDES OF CORNER WHERE BACKSIDE OF WEB JOINS HUB,3/16 IN. BY 45 DEG CHAMFER OD OF HUB OF BACK SIDE OF |
| STYL | STYLE DESIGNATOR | SIDE FACE, PROTRUDING HUBS |
Part DKC8276 With Different Manufacturers
Low Price
Warrantied inventory at competitive prices
Find it fast
Search the world's largest inventory of electronic components by manufacturer, category or part number
Get it fast
All inventory ready to ship from our sellers
Quality guaranteed
We sell only warrantied and traceable parts
Semiconductor's Certifications and Memberships
